山东冷库安装装配式冷库门的要求

时间:2020-03-02 16:18来源:本站 作者:admin 点击:
山东冷库安装装配式冷库门的要求如下:(1)装配式冷库配置3种门:铰链门,自动单侧滑动门,单侧滑动门。(2)冷库门厚度、面层和绝热性能要求与库板相同,门框及门的结构不应

山东冷库安装装配式冷库门的要求如下: (1)装配式冷库配置3种门:铰链门,自动单侧滑动门,单侧滑动门。 (2)冷库门厚度、面层和绝热性能要求与库板相同,门框及门的结构不应有冷桥。 (3)所有低温冷库门门框内应埋设防止门的密封条被冻结的电加热或介质加热装置,当采用电加热时需提供电热保护装置和安全措施。 (4)小型冷藏库、冷冻库库门为手动平开门,门的表面要求同隔热板面板,库门把手及库门结构不应有“冷桥”,库门开度>90度。 (5)冷库库门带有门锁,门锁具有安全脱锁功能。 (6)所有库门都必须开关灵活、轻便,门框及门本身的密封接触平面必须光滑、平整,不得有翘曲、毛剌或螺丝端头歪斜、外露而产生刮、擦现象,保证密封胶条能够贴实门框周边。 The requirements for the installation of assembled cold storage doors in Shandong cold storage are as follows: (1) There are three kinds of doors in the assembled refrigerator: hinged door, automatic single side sliding door and single side sliding door. (2) The thickness, surface layer and thermal insulation performance requirements of the cold storage door are the same as those of the storage plate, and the structure of the door frame and door shall not have cold bridge. (3) Electric heating or medium heating device shall be embedded in the door frame of all low-temperature cold storage to prevent the sealing strip of the door from freezing. When electric heating is used, electric heating protection device and safety measures shall be provided. (4) The door of small refrigerated warehouse and freezer is a manual open door. The surface requirements of the door are the same as that of the heat insulation panel. The handle and structure of the door should not have a "cold bridge", and the opening of the door should be more than 90 degrees. (5) The refrigerator door is equipped with a door lock, and the door lock has a safe unlocking function. (6) All warehouse doors must be opened and closed flexibly and easily. The sealing contact surface of the door frame and the door itself must be smooth and flat, and there shall be no warpage, burr or screw tip skew and exposed, resulting in scraping and scraping, so as to ensure that the sealant strip can stick to the surrounding of the door frame.

(责任编辑:admin)